Biography
VMware 2V0-41.24 Real Question, 2V0-41.24 Study Reference
ActualCollection VMware 2V0-41.24 exam dumps are the best reference materials. ActualCollection test questions and answers are the training materials you have been looking for. This is a special IT exam dumps for all candidates. ActualCollection pdf real questions and answers will help you prepare well enough for VMware 2V0-41.24 test in the short period of time and pass your exam successfully. If you don't want to waste a lot of time and efforts on the exam, you had better select ActualCollection VMware 2V0-41.24 Dumps. Using this certification training dumps can let you improve the efficiency of your studying so that it can help you save much more time.
We are intent on keeping up with the latest technologies and applying them to the 2V0-41.24 exam questions and answers not only on the content but also on the displays. Our customers have benefited from the convenience of state-of-the-art. That is why our pass rate on 2V0-41.24 practice quiz is high as 98% to 100%. The data are unique-particular in this career. With our 2V0-41.24 exam torrent, you can enjoy the leisure study experience as well as pass the 2V0-41.24 exam with success ensured.
>> VMware 2V0-41.24 Real Question <<
Useful 2V0-41.24 Real Question - Easy and Guaranteed 2V0-41.24 Exam Success
We always adhere to the principle of “mutual development and benefit”, and we believe our 2V0-41.24 practice materials can give you a timely and effective helping hand whenever you need in the process of learning our 2V0-41.24 study braindumps. For we have been in this career over ten years and we are good at tracing the changes of the 2V0-41.24 guide prep in time and update our exam dumps fast and accurately.
VMware NSX 4.X Professional V2 Sample Questions (Q89-Q94):
NEW QUESTION # 89
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. ifconfig
- B. tcpdump
- C. debug
- D. tcpconfig
Answer: A
Explanation:
The ifconfig command is used to display the network configuration of interfaces, including the Tunnel Endpoint (TEP) IP on a bare metal transport node. This command provides details about IP addresses, subnet masks, and other network settings for each interface on the node.
NEW QUESTION # 90
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged.
What could cause this issue?
- A. Syslog is not configured on the NSX Manager.
- B. Syslog is not configured on the ESXi transport node.
- C. Distributed Firewall Rule logging is not enabled.
- D. Zero Trust Security is not enabled.
Answer: C
Explanation:
If Distributed Firewall Rule hit counts are not being logged, it is likely because Distributed Firewall Rule logging is not enabled. For hit counts to appear in the logs, logging must be explicitly enabled on each firewall rule where tracking is required. Without enabling logging at the rule level, no hit count information will be recorded in syslog.
NEW QUESTION # 91
Which three DHCP Services are supported by NSX? (Choose three.)
- A. Port DHCP per VNF
- B. Gateway DHCP
- C. VRF DHCP Server
- D. DHCP Relay
- E. Segment DHCP
Answer: B,D,E
Explanation:
Gateway DHCP: NSX supports DHCP services configured on the gateway, allowing it to provide IP addresses to clients within the network.
Segment DHCP: NSX can provide DHCP services at the segment level, where DHCP is configured directly on a network segment to assign IP addresses to connected clients.
DHCP Relay: NSX supports DHCP Relay, which allows forwarding of DHCP requests to an external DHCP server for IP address assignment.
NEW QUESTION # 92
In an NSX environment, an administrator is observing low throughput and congestion between the Tier-O Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A. Add an additional vNIC to the NSX Edge node.
- B. Configure a Tier-1 gateway and connect it directly to the physical routers.
- C. Deploy Large size Edge node/s.
- D. Configure ECMP on the Tier-0 gateway.
- E. Configure NAT on the Tier-0 gateway.
Answer: C,D
Explanation:
ECMP (Equal Cost Multi-Path) is a routing protocol that increases the north and south communication bandwidth by adding an uplink to the tier-0 logical router and configure it for each Edge node in an NSX Edge cluster2. The ECMP routing paths are used to load balance traffic and provide fault tolerance for failed paths2. The tier-0 logical router must be in active-active mode for ECMP to be available2. A maximum of eight ECMP paths are supported2. Configuring ECMP on the tier-0 gateway can address low throughput and congestion by distributing the traffic among multiple paths and avoiding bottlenecks.
Deploying Large size Edge node/s can also address low throughput and congestion by providing more resources (memory, CPU, disk) for the Edge node to handle the network traffic. The NSX Edge VM system requirements vary depending on the appliance size, which affects the bandwidth, NAT/firewall, load balancer, and VPN capabilities of the Edge node1. A Large size Edge node has 32 GB memory, 8 vCPU, 200 GB disk space, and can support 2-10 Gbps bandwidth, L2-L4 features, and L7 load balancer1. An Extra Large size Edge node has 64 GB memory, 16 vCPU, 200 GB disk space, and can support more than 10 Gbps bandwidth, L2-L4 features, L7 load balancer, and VPN1. Deploying a larger size Edge node can improve the performance and capacity of the tier-0 gateway.
Reference: 2: Understanding ECMP Routing - VMware Docs(https://docs.vmware.com/en/VMware-NSX- T-Data-Center/3.2/administration/GUID-443B6B0D-F179-429E-83F3-E136038332E0.html) 1: NSX Edge VM System Requirements - VMware Docs(https://docs.vmware.com/en/VMware-NSX-T-Data- Center/3.2/installation/GUID-22F87CA8-01A9-4F2E-B7DB-9350CA60EA4E.html) Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-
443B6B0D-F179-429E-83F3-E136038332E0.html
NEW QUESTION # 93
What are three NSX Manager roles? (Choose three.)
- A. master
- B. cloud
- C. policy
- D. zookeepet
- E. manager
- F. controller
Answer: C,E,F
Explanation:
According to the VMware NSX 4.x Professional documents and tutorials, an NSX Manager is a standalone appliance that hosts the API services, the management plane, control plane, and policy management. The NSX Manager has three built-in roles: policy, manager, and controller2. The policy role handles the declarative configuration of the system and translates it into desired state for the manager role. The manager role receives and validates the configuration from the policy role and stores it in a distributed persistent database. The manager role also publishes the configuration to the central control plane. The controller role implements the central control plane that computes the network state based on the configuration and topology information3. The other roles (master, cloud, and zookeeper) are not valid NSX Manager roles.
NEW QUESTION # 94
......
The ActualCollection are one of the high-in-demand and top-rated platforms that has been offering real, valid, and updated VMware NSX 4.X Professional V2 (2V0-41.24) practice test questions for many years. Over this long time period countless candidates have got success in their dream VMware NSX 4.X Professional V2 (2V0-41.24) certification exam. They all got help from VMware NSX 4.X Professional V2 (2V0-41.24) exam questions and easily crack the final VMware 2V0-41.24 exam.
2V0-41.24 Study Reference: https://www.actualcollection.com/2V0-41.24-exam-questions.html
We have online and offline chat service stuff, they possess professional knowledge for 2V0-41.24 training materials, if you have any questions, just contact us, The VMware NSX 4.X Professional V2 (2V0-41.24) certification exam has been inspiring VMware professionals since its beginning, VMware 2V0-41.24 Real Question It is finished and summarized by our professional team, and corrected by senior IT lecturers, You can use this 2V0-41.24 simulation software without an internet connection after installation.
How do attackers make software break on purpose, Saluzzi, 2V0-41.24 who had attended Bishop Ford High School in Brooklyn, carried himself like a ball player, We have online and offline chat service stuff, they possess professional knowledge for 2V0-41.24 Training Materials, if you have any questions, just contact us.
Using 2V0-41.24 Real Question Makes It As Easy As Sleeping to Pass VMware NSX 4.X Professional V2
The VMware NSX 4.X Professional V2 (2V0-41.24) certification exam has been inspiring VMware professionals since its beginning, It is finished and summarized by our professional team, and corrected by senior IT lecturers.
You can use this 2V0-41.24 simulation software without an internet connection after installation, If your answer is "yes", then you really have clipped into the right website, now I would like to reveal their secret weapons to you--our 2V0-41.24 practice training.
